novexx

Dispensing Edges

  • The dispensing edge has a fixed connection to the brackets.
  • To adjust the vertical position, lift/lower the entire device.
  • The slope angle can be adjusted by rotating the brackets.

Compatible with:

     ALS 20X

     ALS 30X

     ALX 73X

  • The position of the dispensing edge can be adjusted vertically.
  • The device need not be moved to adjust the position of the dispensing edge; the device’s mounting need not be dismantled.

Compatible with:

     ALX92X

     ALS 20X

     ALS 256

     ALS 30X

  • The dispensing edge is pivoted. A torsion spring in the dispensing head presses the dispensing edge downwards and onto the surface of the product.
  • Allows compensation for height differences between the products or on the product surface.

Compatible with:

     ALS 20X

     ALS 30X

     ALS 73X

  • An alternative for applications which do not leave enough space for the standard dispensing edge holder, which juts out the bottom side.
  • Is attached directly to the machine

Compatible with:

ALS 20X

ALS 272

ALX 73X 

  • The length-adjustable V-shape dispensing edge offers an additional opportunity to adapt the machine to the application.

Compatible with:

     ALX 73X

  • The dispensing edge is pivoted in the dispensing head. Compressed air presses the dispensing edge onto the surface of the product.
  • Allows compensation for height differences between the products or on the product surface.

Compatible with:

     ALX 73X

     ALS 20X

     ALS 30X

  • L-shaped dispensing edges can be mounted with the fixed (standard) dispensing edge holder, or with one of the two optionally available adjustable holders.
  • The finely adjustable dispensing edge holder can be adjusted by means of an adjusting spindle in steps of 0.2 mm.
  • The normally adjustable dispensing edge holder offers a larger setting range , which can be further extended by installing longer rods into the holder.

Compatible with:

     ALX 73X

     ALS 20X

  • Enables a vertical fine adjustment of the dispensing edge towards the product without moving the machine.

Compatible with:

     ALX 73X

     ALS 30X

  • The pressure roller attaches the labels onto the product. It is required in “direct dispensing” mode. • Must have encoder (ASPF)

Compatible with:

     ALX 92X

  • Recommended dispensing edge for direct dispensing.
  • Must have encoder (ASPF)

Compatible with:

ALX 92X

  • Applies labels to products without touching them. It suits especially well for labeling delicate products like fruits or vegetables.

Compatible with:

     ALX 73X

  • Presses labels onto products by means of a movable pressure plate, which is driven pneumatically. Pressure plates are available in different sizes.

Compatible with:

     ALX 73X

PDF

Have more questions? Get in touch with us!